Multi rip sawVH-JM1425(ukukhanya)
Umfanekiso wesixhobo
Iinkcukacha ezingundoqo zobuGcisa
| INGCACISO KUNYE NOMZEKELO | MJ1425 |
| Max.Idayari yeblade(mm) | Φ300 |
| Ubukhulu bobubanzi bokusebenza(mm) | 250 |
| Ubuncinci.ubude bokusebenza(mm) | 250 |
| Ubukhulu bokusebenza (mm) | 75 |
| Saw isantya(r/min) | 4500 |
| Saw Spindle dia(mm) | Φ50 |
| Isantya sokutyisa(m/min) | 4--18 |
| Ubone injini yokunyusa | 0.37 |
| Ukuphakamisa injini(kw) | 0.37 |
| Injini yesondlo (kw) | 3 |
| Saw motor(kw) | 22 |
| Amandla ewonke(kw) | 25.74 |
| Uxinzelelo lomoya (MPa) | 0.6 |
| Ubungakanani(mm) | 2780x1050x1540 |
| Ubunzima obububo (kg) | 1660 |
Iinkcukacha
ELECTRONIC/PNEUMATIC/CONFIGURATION CONFIGURATION
Isixhobo sokubuyela kwakhona
I-feed in let install up and down multiple anti-reverse technology, ukuqinisekisa ukuba umqhubi ayonakaliswa yi-rebound ye-chips chips.
Uhlobo olunzima lwebhokisi yegiya
Ivili lokutyisa liqhutywa yi-universal joint and gear box ukuqinisekisa ukuba akukho lahleko yamandla kunye nokutya okunamandla.
Saw shaft lift yombane
Ukutyhala-iqhosha lohlobo lolawulo lwesarha yokusonta phezulu nasezantsi, ilula kwaye iyakhawuleza, iphucula ukusebenza kakuhle.
Ulwakhiwo lwangaphakathi oluyalelweyo
Isondo eliphezulu lokutya linamaqela angama-7, i-roller ephantsi inamaqela angama-5, ukuhanjiswa kusondele kwaye kucwangciswe, izinto ezimfutshane zingadlula kakuhle, i-sawing izinzile kwaye iyasebenza.
Isigqubuthelo esivulekileyo
Isigqubuthelo sezixhobo samkela ifom evulekileyo, enokuvumela umthi ogqithise ububanzi bokucubungula ukuba udlule kakuhle, uguquguquke kwaye ulungele.
Ujongano lokusebenza olulula Iphaneli yokusebenza ithatha iqhosha le-Siemens no.2 le-APT ephezulu, yonke imisebenzi igqitywe kwipaneli, ixhotyiswe ngokukhanya komboniso wephutha, ukumisa okungxamisekileyo, iqhosha lokuphakamisa umbane njalo njalo.
